Gas log lighters for wood are pretty similar to burners for gas log fireplaces. The primary difference appears to be the added embers and cinders placed on and around a burner for gas log fireplaces to make the flame appear more realistic. I want to use a gas log lighter some similar fashion so we can also burn wood in an outdoor fireplace. So far, the few people I have talked to have all said that a log lighter just won't work, but haven't really been able to explain why. I have considered installing two log lighters, side by side or one on top of the other, and/or modifying a log lighter with more flame outlets (holes) at random locations. Is there really some reason why a log lighter can't be used for both wood and ceramic logs? Thanks.
I have never imagined, or seen a combo fireplace as you describe, yet you have info that suggests the residue and its effects on gas burner jets, in conjunction.
In one way, what you're suggesting is like a propane grill with charcoal above, on a rack, to eventually effect cooking something, then the gas could either be shut off or the valve closed lowering the flame. There will be residue that probably will at some point, affect the effectiveness of the expulsion of gas from the Jets.
I've also never seen this; but a gas device with jets hardware mounted to the side of some stacked wood in a fireplace could ignite the wood, but not strictly have residue fall to the jets.
No real offense meant, but many who own Gas log fireplaces are as interested in the effect, the ambience, the romantic notion of a fire without the mess after. Certainly a wood burning, and gas burning fire also allow some levels of HEAT to warm a room/area, but not strictly efficiently. Aesthetics is a major notion of fireplaces too, as you pretty clearly state using the word "REALISTIC"
Steven Wolf
Just my two "sense"
March 27th, 2008 at 3:24 pm
I have never imagined, or seen a combo fireplace as you describe, yet you have info that suggests the residue and its effects on gas burner jets, in conjunction.
In one way, what you're suggesting is like a propane grill with charcoal above, on a rack, to eventually effect cooking something, then the gas could either be shut off or the valve closed lowering the flame. There will be residue that probably will at some point, affect the effectiveness of the expulsion of gas from the Jets.
I've also never seen this; but a gas device with jets hardware mounted to the side of some stacked wood in a fireplace could ignite the wood, but not strictly have residue fall to the jets.
No real offense meant, but many who own Gas log fireplaces are as interested in the effect, the ambience, the romantic notion of a fire without the mess after. Certainly a wood burning, and gas burning fire also allow some levels of HEAT to warm a room/area, but not strictly efficiently. Aesthetics is a major notion of fireplaces too, as you pretty clearly state using the word "REALISTIC"
Steven Wolf
Just my two "sense"
References :
45 plus years as a contractor, grew up with a firplace in every room of the house, and have grilled and used gas fireplaces
March 27th, 2008 at 6:31 pm
wouldn't do that if i was you
you will run the risk of 1 clogging the gas ports or 2 burning through the gas manifold and then you would have an uncontrolled flame
a wood fire burns hotter then the gas logs and the gas system isnt built for that temp
References :